| FA135915 | How the phase balancing is done by My Ecodial L during the power calculation. Consider a network having a source (400 Volts) and three single phase loads (each of 10 Amps)
During the power sum, Ecodial sizes the source requirement... |
| FA135920 | Why the international version of My Ecodial L is always not sizing the single core cable below 25 sq.mm. This parameter in the international version is left for the software adaptation.
|
| FA135918 | Why My Ecodial L is showing the following message while doing the minimum conductor sizing for the multi core cable.
***> Cable
For aluminium, the minimum CSA allowed is 2.5 mm²; Ecodial has calculated a much lower required CSA. In order not to oversize the... |
| FA135916 | Why My Ecodial L international version is not proposing the multi core cable results not beyond 240 or 300 mm2. For the Multi-core cable, software is showing the 240 or 300 mm2 conductor as a maximum cross sectional area result.
Because, when the load is 3P+N+PE... |
| FA12081 | What is the Life Cycle Assessment (LCA) for the Multi9 product range. For Multi9 product ranges, Mean Time To Failure (MTTF) values is used for assessment of the product life cycle.
MTTF is the estimated reliability... |
| FA22433 | What is the broadcast address in terms of Ethernet network. A broadcast address is an IP address that is used to target all systems on a specific subnet network instead of single hosts.
In other words broadcast... |
| FA21086 | How to calculate the scan time of Hot Stand-By (HSBY) system in Modicon Quantum range. Considering the Hot Stand-By system, the scan time mainly comes from the addition of three parts:
Part 1: User application logic execution time,... |
| FA22434 | How to fix the Error "User Interface Kernel (UIK)" in Concept. The error "User Interface Kernel" (UIK) comes due to failure of reading the desktop file. The desktop file (project name .dsk) which contains screen... |
| FA21079 | How to check the health status of CRA module 140CRA93100 in Concept. Function block STAT can be used under 984LL section in Concept to check the health status of CRA module 140CRA93100. It will give the communication... |
| FA12099 | What is the accuracy of the Premium PLC CPU real time clock. Real time clock accuracy:Accuracy of the real time clock is one second (%SW50) +/- 200ms.Resolution of the real time clock is one second (%SW50) +/-... |